Month: March 2014

I made a seat pan from fiberglass to fit in the recessed area formed by the tubing bead. The upholstery was riveted to the seat pan and the pan was attached to the seat with four 6mm bolts.

The seat upholstery was done by Brad’s Upholstery in Lancaster, MA.

I used the original fender from the SR250 as a plug for laying up fiberglass to make a new fender. The fender was taped and waxed to provide a smooth surface that the fiberglass would release from. Once the rough shape was cured, I sketched and cut out the final fender shape from the fiberglass.