Instrument Panel Redo

Started assembling the bike and discovered it’s impossible to get the clutch cable past the instrument panel. I wound up reworking the mounting bracket. The speedo and tach had to be moved away from the handlebars about 3/4″. The standoffs for the led panel had to be relocated. The headlight brackets had to be remade longer. Lastly, the LED panel was redesigned to allow for the clutch cable and fill the space created by moving the instruments.

2 thoughts on “Instrument Panel Redo

    • I ordered this tachometer from Dime City Cycles. The tach has four wires: power, ground, coil & back light. I don’t recall which wire is which at this point. The tach comes with a wiring diagram.

      Because the bike lacks the drive mechanism for a mechanical tach, there isn’t a Yamaha tach that you can use.

Leave a Comment